Function of Feeding Department:
●Electrically controlled the connecting and separated for the every
unit with alarm to ensure the operator safety during its
●The left and right baffle,kick feeding,back baffle was adopted
●Brush and the top suction device at the inlet which can clear away
the impurity from the paper face to improve the printing quality.
●Mainframe was controlled by the frequency conversion ,start-up and
running steady,which can save the power about the 30%.
●Infrared photoelectricity counter can presetting the order paper
●One lock function for whole machine ,which can avoid the damaged
the machine with error operation (Main motor start running ,every
unit will be lock automatic).
●Pressure model elasticity feeding rubber roller,which can not to
damaged the strength for corrugated cardboard.
●Option: outside baffle add the flap function,which made the
cardboard orientation more exact,avoid to waste.
Option:kick feeding paper or lead edge feeding paper.
Function of printing Department:
●All the axle and roller was used the high grade steel,computer
dynamic balance; Eliminate the centrifugal effect, plated with
rigid chrome and grinded surface;
●Printing phases was adopted the planetary gear structure,the
electric digit 360o adjustment, show the digit(stop, running can adjustment);
●Printing roller landscape orientation was adopted the touch screen
control, and electric digit adjustment,the adjustment scope is
●Pneumatic pump supply the ink;
●Hanging plate device ,total hanging and half hanging slotting
notch,foot switch control the clockwise and counter-clockwise, fast
to fixing and take down the plate;
●Fixing the oil interval,printing pressure roller ,lead roller
interval were used the free-spanner self-lock worm wheel and worm
device adjustment and fix;
●Printing phase fix was used the pneumatic brake structure,the
brake structure will stop the mainframe running when the every unit
separated,which can keep the origin gear fix position can not
●Reposition function,before reposition,company memory printing
position,it can automatic reset after reposition;
●Rubber roller,and the surface wrapped wear rubber,special grinding
effect of transfer ink;
●Steel anilox roller,steel face chrome pressure The anil ox and
●Pneumatic uplift plate device,the anilox roller break away
pneumatic, smooth the oil automatic when the machine not printing,
it can prevent the oil dry.
Function of Slotting Department:
●Slotting phases was adopted the planetary gear structure, the
electric digit 360o adjustment,show the digit(stop, running can adjustment);
●Slotting tool rest pressure wheel horizontal move by electric
mechanic joint adjustment;
●The height of box size was adjustment synchronous;
●Pressure interval was used the free-spanner self-lock worm wheel
and worm device adjustment and fix;
●The elastic tangential scraper structure could cut off three and
five layers cardboard without any adjustment;
●Slotting knife was choice with the high quality alloy steel,which
made the rigidity and tenacity was best when heat treatment, it can
suitable long-term used;
●It could be equipped with portable punching die holder.
●Option: Computer double shaft slotting adjustment.
Function of Die Cutting Department:
●The die cutter phase is controlled by computer and electric digit;
●The die cutting scraper could be adjusted horizontally with manual
control ranging from 10mm;
●The glue roller cuts the trimming mechanism and the cushion could
be used for many times and save the use cost to a great deal;
●The cushion roller mechanical, horizontal and facility from + 30mm
to -30mm could raise the service life of the cushion of the
●Used the die cutting equalizer, providing wire-speed compensation,
be ensure the carton forming same size after repair the rubber.
Option: Contain slotter circle blade.
Click picture above to see XT-D production video.